Installation; Preparing For Intellectual Stack - Christie LX41 User Manual

2. Installation

For safety reasons, read
installation. In addition, take note of the followings for proper
● When using Intellectual Stack, both projectors will respond to the remote control
signals until STACK MODE on either projector is set to SUB.
During installation, it is recommended to operate one projector with the remote
control and the other with the control panel on the projector or a wired remote
control. In this case, disable the remote control receiving on the other projector
with the KEY LOCK
● Images from Set A and Set B may superimpose well but the image positions
can shift over time.
Readjust to superimpose the images.
● If the volume level of the built-in speakers is too high, the two projectors may
resonate, noise may occur and the image quality may deteriorate.
In this case, check the volume setting on both projectors. Lower the volume
until the symptoms disappear or arrange the projectors side by side. If the
image positions are shifted, readjust.

2.1 Preparing for Intellectual Stack

When using Intellectual Stack via RS-232C connection, ensure the following set-
tings are set on the two projectors. Otherwise, the Intellectual Stack menu cannot
be operated.
● STANDBY MODE in SETUP menu: NORMAL
(Operating Guide
● COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
(Operating Guide
● STACK LOCK in SECURITY menu: OFF
When STACK LOCK is set to on, menus related to Instant Stack cannot be
operated. It is therefore necessary to set it to off during installation and menu
setting.
(1) Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > SECURITY
> STACK LOCK
STACK LOCK dialog will
Guide → SECURITY
(2) Use the ▲/▼ buttons to highlight OFF, and press the ► button to complete
the setting.
LX41/LW41 User Manual - Instant Stack Guide
1.2 Important safety instruction
feature. (Operating Guide
→
SETUP menu)
→ OPTION menu)
appear on screen.
menu)
( 3~5 ) carefully before
→ OPTION
(Operating
7
use of Instant Stack.
menu)
020-000509-01 Rev.1 (06-2012)