Setting The Time Functions; Timer; Cooking Time; End Time - Siemens HB34A Series Instruction Manual

Setting the time functions

This oven has various time functions. The
the menu and moves through the different functions. The time
symbols remain lit up while settings are programmed. A time
function that has already been programmed can be modified
with the @ or A sensors.

Timer

The timer works independently of the oven. The timer has its
own signal. You can therefore distinguish whether the time set
for the timer or the automatic oven shut-off have finished

(cooking time).

Press the sensor.
0
1.
The V symbol lights up on the display panel.
Programme the timer using the
2.
Sensor suggested value
Sensor suggested value
The programmed time is shown after a few seconds. The time
set for the timer starts to count down. The
on the display panel and the time elapsed is displayed.
The time set for the timer has elapsed
A signal will sound. The display panel will show
off the timer using the 0
Changing the time set on the timer.
Change the time set for the timer using the
The altered time is shown after a few seconds.
Cancelling the timer
When the oven switches off, the timer continues working.
Resetting the timer to ‹‹ :
switches off.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
To view the timer , the cooking time
V
the time , press the
0 0
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.
Cooking time
You can set the cooking time for each of your dishes on the
oven. Once the set time has elapsed, the oven will switch off
automatically. This means that you do not have to stop what
you are doing to switch off the oven.
Example in the diagram: Cooking time 45 minutes.
Use the function selector to set the type of heating.
1.
Tap the sensor button
0
2.
‹‹ : ‹‹ and the cooking time symbol
display panel.
8
0 sensor activates
or sensors.
@ A
= 10 minutes.
@
A = 5 minutes.
V symbol lights up
‹‹ :
sensor.
@ or A
‹‹ with the A sensor. The timer
, the end time
x
sensor repeatedly until the required
twice.
x will appear on the
Set the cooking time using
3.
Suggested value for
Suggested value for
Tap the °C sensor button.
4.
Using
@
After a few seconds, the oven will start up. The set temperature
will appear on the display panel and the
The cooking time has finished
A beep will sound. The oven will stop heating. The display
‹‹ . Switch
panel will show
a new cooking time with the
sensor and turn the function control knob to zero. The oven is
switched off.
sensors.
Changing the cooking time
Press the
or sensors.
@ A
Cancelling the cooking time
Press the
with the sensor
Viewing the time settings
If several time functions are programmed, the corresponding
or
y
symbols light up on the display panel.
To view the timer
the time
0
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.

End time

You can programme the time at which you wish your food to be
ready. The appliance will then start automatically and switch off
at the desired time. You can, for example, place your food in
the cooking compartment in the morning and set the oven so
that it is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the diagram: It is 10.30 am, the cooking time is 45
minutes and the oven is set to finish cooking at 12.30 pm.
Set the function selector.
1.
Tap the sensor button
2.
Set the cooking time using
3.
@ or A
= 30 minutes
@
= 10 minutes
A
or , set the required temperature or grill setting.
A
: . Press the
‹‹ ‹‹ 0
or
@ A
sensor twice. Change the cooking time using the
0
sensor twice. Reset the cooking time to
0
. The time has been cancelled.
A
, the cooking time
V
, press the sensor repeatedly until the required
0
0 twice.
or
@ A
.
symbol will light up.
x
sensor twice. You can set
sensors, or press the
0
:
‹‹ ‹‹
, the end time or
x y
.