Setting The Time Functions; Timer; Cooking Time; End Time - Siemens HB 64B Series Instruction Manual

Setting the time functions

This oven has various time functions. The
the menu and moves through the different functions. The time
symbols remain lit up while settings are programmed. A time
function that has already been programmed can be modified
with the @ or A sensors.

Timer

The timer works independently of the oven. The timer has its
own signal. You can therefore distinguish whether the time set
for the timer or the automatic oven shut-off have finished

(cooking time).

Press the sensor.
0
1.
The V symbol lights up on the display panel.
Programme the timer using the
2.
Sensor suggested value
Sensor suggested value
The programmed time is shown after a few seconds. The time
set for the timer starts to count down. The
on the display panel and the time elapsed is displayed.
The time set for the timer has elapsed
A signal will sound. The display panel will show
off the timer using the 0
Changing the time set on the timer.
Change the time set for the timer using the
The altered time is shown after a few seconds.
Cancelling the timer
When the oven switches off, the timer continues working.
Resetting the timer to ‹‹ :
switches off.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
To view the timer , the cooking time
V
the time , press the
0 0
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.
Cooking time
The oven allows you to set the cooking time for each type of
food. The oven switches off automatically when the cooking
time has elapsed. This avoids interrupting other tasks to switch
the oven off or exceeding the cooking time by mistake.
Example in the picture: Cooking time: 45 minutes.
Select the type of heating using the function control knob.
1.
Press the sensor twice.
0
2.
The display panel will show
symbol x .
8
0 sensor activates
or sensors.
@ A
= 10 minutes.
@
A = 5 minutes.
V symbol lights up
‹‹ :
sensor.
@ or A
‹‹ with the A sensor. The timer
, the end time
x
sensor repeatedly until the required
‹‹ : ‹‹ and the cooking time
Programme the cooking time using the
3.
Sensor suggested value
Sensor suggested value
Press the ºC sensor.
4.
Set the temperature or required grill power using the
sensors.
The oven will switch on after a few seconds. The programmed
temperature will be shown on the display panel and the
symbol will light up.
‹‹ . Switch
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show
a new cooking time with the
sensors.
sensor and turn the function control knob to zero. The oven is
switched off.
Changing the cooking time
Press the
or sensors.
@ A
Cancelling the cooking time
Press the
with the sensor
or
y
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
To view the timer
the time 0
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.

End time

The oven allows you to set the time when you want the food
ready. In this case the oven switches on automatically and
switches off at the set time. For example, the food may be
placed in the oven in the morning and the oven set so that it is
ready at midday.
Ensure that the food will not go off if it is in the oven for too
long.
Example in the picture: It is now 10:30 AM, the cooking time is
45 minutes and the oven should switch off at 12:30PM.
Set the function control knob.
1.
Press the
2.
Programme the cooking time using the
3.
= 30 minutes.
@
= 10 minutes.
A
: . Press the
‹‹ ‹‹ 0
or
@ A
sensor twice. Change the cooking time using the
0
sensor twice. Reset the cooking time to
0
. The time has been cancelled.
A
V , the cooking time
, press the 0 sensor repeatedly until the required
sensor twice.
0
@ or A sensors.
or
@ A
x
sensor twice. You can set
sensors, or press the
0
:
‹‹ ‹‹
x , the end time y or
or sensors.
@ A