AEG BCK556220M User Manual page 35

Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The core temperature sensor
does not operate.
It takes too long to cook the
dishes or they cook too
quickly.
Steam and condensation
settle on the food and in the
cavity of the oven.
The display shows "C2".
The display shows an error
code that is not in this table.
There is no good cooking
performance using the True
Fan Cooking PLUS function.
There is no good cooking
performance using the True
Fan Cooking PLUS function.
Possible cause
The automatic switch-off is
activated.
The Child Lock is on.
The fuse is blown.
The lamp is defective.
The plug of the core tem-
perature sensor is not cor-
rectly installed into the sock-
et.
The temperature is too low
or too high.
You left the dish in the oven
for too long.
You want to start the Cataly-
sis or Defrost function, but
you did not remove the core
temperature sensor plug
from the socket.
There is an electrical fault.
You did not activate the
True Fan Cooking PLUS
function.
You did not activate correct-
ly the True Fan Cooking
PLUS function with the Plus
Steam button.
ENGLISH
Remedy
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
Replace the lamp.
Put the plug of the core tem-
perature sensor as far as
possible into the socket.
Adjust the temperature if
necessary. Follow the advice
in the user manual.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Remove the core tempera-
ture sensor plug from the
socket.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Refer to "Activating the True
Fan Cooking PLUS func-
tion".
Refer to "Activating the True
Fan Cooking PLUS func-
tion".
35