Planet Networking & Communication IGS-5225 Series User Manual page 146

L2+ multi-port full gigabit managed ethernet switch

Hide thumbs Also See for IGS-5225 Series:

Table of Contents

For a given port, a frame is only transmitted once. It is therefore not possible to mirror Tx frames on

the mirror port. Because of this, mode for the selected mirror port is limited to Disabled or Rx only.

: Click to apply changes

: Click to undo any changes made locally and revert to previously saved values.

The destination port is a switched port that you receive a copy of traffic from the

source port.

User's Manual of IGS-5225 series