Planet Networking & Communication IGS-5225 Series User Manual page 46

IGS-5225-4P2S
 System
LED Color
DC1 Green
Lights to indicate DC power input 1 has power.
DC2 Green Lights to indicate DC power input 2 has power.
Fault Red Lights to indicate that Switch DC or port has failed.
Ring Green
Lights to indicate that the ERPS Ring has been created successfully.
Lights to indicate that Ring state is in idle mode.
R.O. Green
Blinks to indicate that the Ring state is in protected mode.
 Per 10/100/1000BASE-T Port with PoE (Port-1~Port-4)
LED Color
Lights Indicating the port is running at 10/100/1000Mbps speed and successfully established.
LNK/ACT Green
Blinks Indicating that the switch is actively sending or receiving data over that port.
Lights To indicate the port is providing DC in-line power with end-span.
PoE Amber
Off
To indicate the connected device is not a PoE powered device (PD)
46
User's Manual of IGS-5225 series
Function
Function