Planet Networking & Communication IGS-5225 Series User Manual page 84

Buttons
: Click to add a new user.
Add / Edit User
This page configures a user – add, edit or delete user.
The page includes the following fields:
Object
• Username
• Password
• Password (again)
• Privilege Level
than the group privilege level to have the access to that group.
By default setting, most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system maintenance
(software upload, factory defaults and etc.) needs user privilege level 15.
Generally, the privilege level 15 can be used for an administrator account,
privilege level 10 for a standard user account and privilege level 5 for a guest
account.
Figure 4-2-5: Add / Edit User Configuration Page Screenshot
Description
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 31. The valid user name is a combination of letters, numbers
and underscores.
The password of the user. The allowed string length is 0 to 31.
Please enter the user's new password here again to confirm.
The privilege level of the user.
The allowed range is 0 to 15. If the privilege level value is 15, it can access all
groups, i.e. that is granted the fully control of the device. But others value need to
refer to each group privilege level. User's privilege should be same or greater
User's Manual of IGS-5225 series
84