Planet Networking & Communication IGS-5225 Series User Manual page 176

Figure 4-3-3-13: Changes Port VLAN of Port 1~3 to be VLAN2 and Port VLAN of Port 4~6 to be VLAN3
For the VLAN ports connecting to the hosts, please refer to 4.6.10.1 examples. The following steps will focus on the VLAN
Trunk port configuration.
1.
2.
3.
4.
5.
Figure 4-3-3-14: VLAN Overlap Port Setting & VLAN 1 – The Public Area Member Assign
Specify Port-7 to be the 802.1Q VLAN Trunk port.
Assign Port-7 to both VLAN 2 and VLAN 3 at the VLAN Member configuration page.
Define a VLAN 1 as a "Public Area" that overlapping with both VLAN 2 members and VLAN 3
members.
Assign the VLAN Trunk Port to be the member of each VLAN – which wants to be aggregated. For
this example, add Port-7 to be VLAN 2 and VLAN 3 member port.
Specify Port-7 to be the 802.1Q VLAN Trunk port, and the Trunking port must be a Tagged port
while egress. The Port-7 configuration is shown in
User's Manual of IGS-5225 series
Figure 4-3-3-14.
176