Position The Air Conditioner; Complete Installation - Whirlpool ACM122XR0 Use And Care Manual

Position the Air Conditioner

Handle air conditioner gently.
Be sure your air conditioner does not fall out of the opening
during installation or removal.
The place where the power cord exits the air conditioner
should be no more than 4 ft (122 cm) from a grounded
3 prong outlet.
Do not block the louvers on the front panel.
Do not block the louvers on the outside of the air conditioner.
1. Center air conditioner in window. Check that lower rail of air
conditioner is behind and against back side of windowsill.
Lower window sash to hold air conditioner in place.
A. Window sash
2. Check that air conditioner cabinet is tilted to the outside so
that water will run to the outside.
3. Pull left-hand curtain out until it fits into the window channel.
Repeat with right-hand curtain.
Front View
A
B
A. Left curtain
B. Window channel
4. Insert one of the #8 x " round-head screws through left-
hand curtain and into the window channel or through
alternate hole at the top of the curtain and into the window
sash to fasten the curtain to the window.
6
Top View
5. Repeat for right-hand curtain.
A
1. Insert foam seal behind the top of the lower window sash and
against the glass of the upper window.
2. Place window-lock bracket on top of lower window and
against upper window sash.
3. Use a
bracket into the window sash.
B
A
C
A. Left curtain
B. Window channel
C. #8 x " round-head screw
A
B
A. Alternate hole
B. Left curtain

Complete Installation

A
A. Lower window sash
B. Foam seal
" drill bit to drill a starter hole through the hole in the
B