Air Conditioner Use; Starting Your Air Conditioner - Whirlpool ACM122XR0 Use And Care Manual

4. Attach window-lock bracket to window sash with #8 x
round-head screw to secure window in place.
A
B
A. Upper window sash
B. Window-lock bracket
Operating your air conditioner properly helps you to obtain the
best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
If you turn off the air conditioner, wait at least 3 minutes
before turning it back on. This prevents the air conditioner
from blowing a fuse or tripping a circuit breaker.
Do not try to operate your air conditioner in the cooling mode
when outside temperature is below 65°F (18°C). The inside
evaporator coil will freeze up, and the air conditioner will not
operate properly.

Starting Your Air Conditioner

1. Remove the clear, protective film from the front panel badge
(on some models).
2. Set the exhaust control. See "Exhaust (on some models)."
3. Set fan speed. See "Fan."
4. Select the temperature. See "Thermostat."
Exhaust (on some models)
Set the Exhaust control to CLOSED for maximum continuous
cooling. The Exhaust control set to OPEN position allows you to
draw stale or smoky air from the room.
Open—to exhaust room air to the outside
Closed—to circulate room air

AIR CONDITIONER USE

CLOSED
OPEN
"
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
5. Plug into a grounded 3 prong outlet.
6. Press RESET on the power supply cord plug.
NOTE: The Exhaust control will function only when the Fan is
operating.
Fan
Set the Fan control to the desired setting. When the air
conditioner is operating at Low Cool, High Cool, or Turbo Cool,
the fan circulates air continuously.
Turbo Cool—for maximum cooling
High Cool—for normal cooling
Low Cool—for sleeping comfort
Fan Only—fan will run continuously to move air, but the air
will not be cooled.
NOTE: Fan runs on Turbo speed only.
Power Saver (on some models)—The fan runs only when
cooling is needed.
Since the fan does not circulate the room air continuously,
less energy is used but the room air is not circulated as often.
Use Power Saver when you are asleep or away from home.
NOTE: Fan runs on Low speed only.
Your air conditioner will have one of these fan controls:
WARNING
Electrical Shock Hazard
7