Assembling And Disassembling - Panasonic SC-EN38P Service Manual

SC-EN38P / SC-EN38PC

9 Assembling and Disassembling

9.1. Caution
"ATTENTION SERVICER"
Some chassis components may be have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation of the major printed circuit boards and replacing the main
components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
Warning:
This product uses a laser diode. Refer to "Precaution of Laser Diode".
Below is the list of disassembly sections
• Disassembly of Rear Panel Panel
• Disassembly of Transformer P.C.B., AC Inlet P.C.B. & Transformer
• Disassembly of Tuner P.C.B.
• Disassembly of Main P.C.B.
• Replacement of Voltage Regulator IC (IC501)
• Replacement of Voltage Regulator IC (IC502)
• Replacement of Voltage Regulator Transistor (Q501)
• Replacement of Power AMP IC (IC700)
• Replacement of Regulator Transistor (Q502)
• Disassembly of Tact Switch & Sensor P.C.B.
• Disassembly of CD Mechanism Unit
• Disassembly of Traverse Cover
• Disassembly of CD Servo P.C.B.
• Disassembly of Motor Unit & Motor P.C.B.
• Disassembly of Ipod Cradle P.C.B.
• Disassembly of Panel & LED P.C.B.
• Disassembly of Detector P.C.B.
• Disassembly of CD Lid
• Disassembly of Docking Lid
• Disassembly of Function Lid Ass'y
• Disassembly of Woofer
18