Disassembling And Assembling Of Traverse Unit; Disassembly Procedures - Panasonic SA-VK480EE Service Manual

10 Disassembling
Assembling of Traverse
Unit
Note: Refer to Section 6.3.1. Self-Diagnosis Mode Table 1
to set to Service Mode 2.

10.1. Disassembly Procedures

and Step 1 Release the catch and push the guide as arrows shown
to open both grooves.
Step 2 Detach the FFC wires from the adhesive areas.
Caution:
Do not pull the FFC wire to remove the traverse unit
assembly, as it may cause damage to the slot.
82