Panasonic SC-EN38P Service Manual page 32

SC-EN38P / SC-EN38PC
Step 3 : Remove Regulator Transistor (Q502) from the
heatsink unit.
Caution : Handle the heatsink unit with caution due to its
high temperature after prolonged use. Touching it may
lead to injuries.
9.12.1. Assembly of Regulator Transistor
(Q502)
Step 1 : Apply grease to the heatsink unit.
Step 2 : Fix and screws the Regulator Transistor (Q502) to the
heatsink unit.
Note : Ensure the Regulator Transistor (Q502) is tightly
screwed to the heatsink unit.
Step 3 : Solder pin of the Regulator Transistor (Q502) on the
reversed side of Main P.C.B..
Note : Ensure pins of the Regulator Transistor (Q502) are
properly seated and soldered on the Main P.C.B..
32