Panasonic SC-EN38P Service Manual page 33

9.13. Disassembly of Tact Switch &
Sensor P.C.B.
• Follow the (Step 1) - (Step 3) of item 9.4.
• Disassembly of Tact Switch P.C.B.
Step 1 : Remove 2 screws.
Step 2 : Detach 8P FFC cable at connector (CN952) on Main
P.C.B..
Step 3 : Release 5 catches in order of sequence.
Step 4 : Remove Tact Switch P.C.B..
Caution : Take extra care for the locator on the Main P.C.B.
during removal and assembly of the Main P.C.B..
• Disassembly of Sensor P.C.B.
Step 5 : Remove 1 screw.
Step 6 : Remove Sensor P.C.B..
33
SC-EN38P / SC-EN38PC