Panasonic SC-EN38P Service Manual page 35

Step 4 : Lift up the traverse unit to remove it.
Caution : Keep the floating springs (x 4) in safe place &
avoid losing them
9.16. Disassembly of CD Servo
P.C.B.
• Follow the (Step 1) - (Step 3) of item 9.4.
• Follow the (Step 1) - (Step 3) of item 9.6.
• Follow the (Step 1) - (Step 8) of item 9.7.
• Follow the (Step 1) - (Step 2) of item 9.14.
• Follow the (Step 1) - (Step 4) of item 9.15.
Step 1 : Desolder the terminal.
Step 2 : Remove 3 screws.
Step 3 : Flip the CD Servo P.C.B. over to one side.
Step 4 : Detach FFC out from the connector.
Step 5 : Attach a short pin to the unit.
Caution : Insert a short pin into FFC of the optical pickup.
[See "Handling Precautions for traverse unit"]
35
SC-EN38P / SC-EN38PC