Panasonic SC-EN38P Service Manual page 36

SC-EN38P / SC-EN38PC
9.17. Disassembly of Motor Unit &
Motor P.C.B.
• Follow the (Step 1) - (Step 3) of item 9.4.
• Follow the (Step 1) - (Step 3) of item 9.6.
• Follow the (Step 1) - (Step 8) of item 9.7.
Step 1 : Remove 2 screws.
Step 2 : Remove motor assembly.
• Disassembly of motor assembly (gears & belt)
Step 3 : Remove 2 screws.
Step 4 : Remove the belt.
Step 5 : Remove pulley gear, 2nd gear and drive gear.
Step 6 : Remove 2 screws at motor unit.
Step 7 : Remove 1 screw and unsolder 3 points at gear base.
36