Panasonic SC-EN38P Service Manual page 24

SC-EN38P / SC-EN38PC
9.6. Disassembly of Tuner P.C.B.
• Follow the (Step 1) - (Step 3) of item 9.4.
Step 1 : Remove 2 screws.
Step 2 : Detach 12P FFC cable at connector (CN1) on Tuner
P.C.B..
Step 3 : Remove Tuner P.C.B..
Caution : Take extra care for the locator on the Tuner
P.C.B. during removal and assembly of the Tuner P.C.B..
• Disassembly of Tuner Shield
Step 4 : Desolder 4 solder point from Tuner P.C.B. to remove
Tuner Shield.
9.7. Disassembly of Main P.C.B.
• Follow the (Step 1) - (Step 3) of item 9.4.
• Follow the (Step 1) - (Step 3) of item 9.6.
Step 1 : Remove 1 screw and 5P connector (For USB).
Step 2 : Detach 14P FFC cable at connector (CN381) on Main
P.C.B..
Step 3 : Detach 22P FFC cable at connector (CN301) on Main
P.C.B..
Step 4 : Detach 8P FFC cable at connector (CN952) on Main
P.C.B..
Step 5 : Detach 8P cable at connector (P900) on Main P.C.B..
Step 6 : Detach 3P cable at connector (P651) on Main P.C.B..
Step 7 : Detach 5P cable at connector (P650) on Main P.C.B..
Step 8 : Remove Main P.C.B..
24