Panasonic SC-EN38P Service Manual page 30

SC-EN38P / SC-EN38PC
9.11. Replacement of Power AMP IC
(IC700)
• Follow the (Step 1) - (Step 3) of item 9.4.
• Follow the (Step 1) - (Step 3) of item 9.6.
• Follow the (Step 1) - (Step 8) of item 9.7.
Step 1 : Remove 2 screws.
Step 2 : Desolder pins of Power AMP IC (IC700) on the reverse
side of Main P.C.B..
Step 3 : Remove Power AMP IC (IC700) from the heatsink unit.
Caution : Handle the heatsink unit with caution due to its
high temperature after prolonged use. Touching it may
lead to injuries.
30