Screen Configuration; Configuring A Screen Via Viplex Handy - NEC A Series User Manual

4.7 Screen Configuration

4.7.1

Configuring a Screen via ViPlex Handy

Step 1) Launch ViPlex Handy. Select Mode under Settings, and change the mode to Screen
Configuration Mode.
Step 2) Log in to the LED Poster (see 4.5).
Step 3) Click on the Screen name to enter the Screen management page.
Step 4) Select Screen Setting, Screen configuration to enter the Screen configuration.
Step 5) Configure screen information based on actual conditions and click OK.
© NEC Corporation 2019 35