Table of Contents
Advertisement
Figure 18: Brightness Adjustment – Smart Adjustment
Step 5)
Perform the following operations based on your actual needs:
Operation
Create a rule
Modify a rule
Delete a rule
Clear a rule
Enable a rule
View current
brightness
Step 6)
Click the Apply button to confirm the configuration.
Result: The configuration is saved.
Step
a) Click the + button.
Result: A pop-up dialog opens.
b) Choose the Timing button or Auto button.
c) Set the corresponding brightness adjustment rules.
d) Click the Add button.
Result: The rule is created.
a) Select a rule.
b) Click the
button.
Result: A pop-up dialog opens.
c) Modify the rule.
d) Click the Add button.
Result: The rule is modified.
a) Select one or more rules.
b) Click the
button.
Result: A pop-up dialog opens.
c) Click the Confirm button.
Result: The rule is deleted.
a) Click the
button.
Result: A pop-up dialog opens.
b) Click the Confirm button.
Result: The rule is cleared.
a) In the rule list, turn on Enable switch next to a rule.
a) Click the
button.
© NEC Corporation 2019
54
Advertisement
Table of Contents
