Table of Contents
Advertisement
Step 4)
Fix the Connection bracket on the second LED Poster together with the delivered
Connection screw.
Result: The LED Posters are connected.
Step 5)
Prevent tipping of the LED Poster, see 3.2.1 Preventing Tipping – Using a Safety Wire.
Result: The LED Poster is secure.
3.5.2
Wall Mounting
To mount two or more LED Posters as a video wall, draw the anchor points for each wall mount
bracket (1) on the wall. Leave a gap of 73 mm (A) between two brackets.
Figure 3: Mounting Two Adjacent Cabinets on a Wall
Then proceed with the wall mounting as described in section 3.3 Wall Mounting, on page 19.
3.5.3
Hanging Mounting
Prerequisites
Personal
Two or more people
Tools
Ladder/ elevated working platform
Tools for mounting (e.g. hammer, screwdriver,
Allen key, jaw spanner)
Drilling equipment (e.g. drilling machine and
fitting attachment/head)
Mounting material (screws, dowels etc.)
Measurement tools (e.g. rule, spirit level)
Equipment
4 Hanging brackets
12 screws M6 × 16 mm
12 washers
depending on mounting surface,
wall material/condition
depending on
weight of LED Poster
mounting surface, wall
material/condition
see 2.1 Contents, p. 7
© NEC Corporation 2019
23
Advertisement
Table of Contents
