Preventing Tipping - Using A Safety Wire - NEC A Series User Manual

3.2.1 Preventing Tipping – Using a Safety Wire
To prevent the LED Poster from tipping over with the pedestal stand, NEC strongly recommends
using a safety wire as additional security.
Caution!
Risk of personal injuries and product damage if the LED Poster tips over due to
improper installation.
 Do not attempt to hang the LED Poster using the safety wire. The LED Poster
must be properly installed.
 Do not use the eyebolts to suspend the LED Poster.
 A safety wire is not included in the delivery. Use a wire or chain as safety wire
that can support the weight of the unit if needed.
 Ensure the wall or ceiling can support the weight of the LED Poster.
Personal 2 or more
Equipment Wire or chain (to prevent tipping)
Attachment for wall, e.g. hook
2 Eyebolts for tipping prevention
How to do it
Step 1) Attach the eyebolts to the LED Poster at a suitable position.
Step 2) Attach a suitable safety wire to the eyebolts in the LED Poster.
Step 3) Mount a suitable attachment, e.g. a hook, to the wall to that the LED Poster will be
attached.
Step 4) Attach the safety wire to the LED Poster and the wall.
Result: The LED Poster is secured.
Caution!
Risk of product damage.
Be sure to remove the cord or chain from the wall before moving the LED Poster.
not included in delivery
depending on
 weight of LED Poster
 mounting surface, wall
material/condition
see 2.1 Contents, p. 7
© NEC Corporation 2019 18