Table of Contents
Advertisement
Attaching a wall mount or multi-display mounting arm
The tilt and swivel stand, as shipped with the display, is interchangeable with commercially available wall mounts or multi-display
mounting arms that:
•
Come with a mounting plate with 6 slotted screw holes at 100 mm x 200 mm, and
•
Bear the total weight of the LCD panel (without the stand) and the cables connected to it.
For more information ask your mounting arm supplier.
Note:
Use the original screws to use the LCD panel back on its original tilt stand.
Choose the screw size carefully according to the mount plate thickness.
If the screws are too long, they could damage the internal parts. If they are
too short, the connection becomes loose and the display could fall out.
How to attach an arm stand
1. Place a soft cloth or cushioning material over a stable even surface.
2. Put the display face down on the soft cloth.
3. Remove 4 screws and detach the tilt stand, using a Phillips head screwdriver.
10-M4 Max. Depth 9 mm
Center of the display area
Cushioning material
4. Attach an arm stand.
NOTE:
Do not try to attach the panel to the arm that is already fi xed in place by yourself. Ask for assistance of another
person. Tipping the panel over or dropping it could cause damage and/or injury.
CAUTION
100 mm
100 mm
200 mm
Back of the display
English-29
Mounting plate thickness
Screw size
1.5 - 3.5 mm
ISO M4 x 12
Advertisement
Table of Contents
