Programming; Sounder Volume; Sleep; Horn Volume - Permobil R-net User Manual

Permobil R-net (PJSM)

2.4.12.6 Programming

The following section describes submenus related to Programming.

Sleep

sets the time after which the control system will
go to sleep if an input device command is not
received.

Sounder Volume

sets the volume of the sounder used to indicate
button presses.

Horn Volume

sets the volume of the horn.
Start-up Beep
sets whether not the controller emit a short beep
when turned on. Available only in later versions
of the control panel.
Momentary Screens sets whether programmed Momentary Screens
are displayed.
Display Speed sets how the wheelchairs speed is displayed;
options are mph, km/h or Off.
Displays sets the format of the digital drive display; options
are odometer, speed or both.
Permobil Joystick Module for R-net
27