Activating Flight Mode; Various Ways To Access Modes - Permobil R-net User Manual

Permobil R-net (PJSM)
3.2 Flight mode
ConnectMe contains a radio transmitter. In certain areas, radio
transmission is not allowed and ConnectMe must be set to flight
mode.
3.2.1

Activating flight mode

1. Turn the power wheelchair ON.
2. Go into seat mode by using the mode button on the joystick or
Omni display. If the control panel does not have a mode button
use the left paddle switch for mode selection. A switch plugged
into the 1/8" monojack port of the joystick or Omni display can
also be used for mode selection.
3. If the control panel is an Omni programmed for switched driver
controls continue from step 6.
Figure 60. Various ways to access modes.
ConnectMe
61