Pairing With Devices - Permobil R-net User Manual

Permobil R-net (PJSM)
2.5.1 General
When a wheelchair is delivered equipped with a control panel
containing Bluetooth®, the Bluetooth® functions are pre
programmed to a basic setup. This setup is described below.
The basic setup is prepared for pairing of up to four Bluetooth®
devices, two PC mice or Android™ devices and two iDevices®,
without any additional tools. The setup can be reprogrammed using
a programming key and an R-net programmer installed on a
computer. With this equipment it is possible to e.g. rename or
replace text and icons describing a certain device, activate mouse
commands, nudge time, change the cursor speed etc.
2.5.2

Pairing with devices

A device must be set to On from the Settings Menu before it can be
paired. Follow the description below.
Permobil Joystick Module for R-net
29