Learning An Ir Code; Learning An Ir Code Procedure; Sample Of Ir Setup - Permobil R-net User Manual

Permobil R-net (PJSM)
2.6.3

Learning an IR code

The IR receiver is located above the screen on the control panel,
marked with an A in the figure.
When learning a code, the remote control device must be held so
that its IR transmitter points towards the IR receiver on the control
panel, i.e. the little window marked A in the figure.
2.6.3.1

Learning an IR code procedure

Enter the IR Setup menu.
Select an appliance, e.g. TV – (Device 1) as illustrated. "(Device 1)"
shows where the equipment's unique name may appear on the
screen.
Permobil Joystick Module for R-net
Figure 41. The IR receiver location.
Figure 42. Sample of IR Setup.
43