Pairing With Idevice; Updating The List Of Devices; Accessing A Bluetooth Device - Permobil R-net User Manual

Permobil R-net (PJSM)
2.5.2.6 Pairing with iDevice®
The following process should be carried out on the iDevice®.
• Select settings and set Bluetooth® to on.
• Select R-net iDevice® X from the list of available devices.
• R-net iDevice® X should appear as a paired device.
• When an connection is established the Bluetooth® icon on the
control panel display stops flashing.
2.5.2.7

Updating the list of devices

The control panel stores the Bluetooth® IDs of up to four devices.
To replace an entry on the list of devices, one of the existing pairings
must be deleted. This process is initiated from the paired device and
will vary depending on the type of device.
Once a device is unpaired, a new device can be added.
2.5.3 Operating Bluetooth® devices
This section describes the basic settings of a wheelchair delivered
with a control panel with integrated Bluetooth®.
2.5.3.1 Accessing a Bluetooth® device
The following section describes how to access one of the paired
Bluetooth® devices.
Permobil Joystick Module for R-net
33