Enabling And Disabling Ir Codes - Permobil R-net User Manual

Permobil R-net (PJSM) Permobil Joystick Module for R-net
2.6.5

Enabling and disabling IR codes

IR codes can be enabled or disabled in the IR Setup menu. If a code
is disabled, it will not transmit and will not appear in IR mode.
To disable an IR code, deflect the speed paddle up or down. A
disabled IR code appears with an X against the highlighted
command.
To enable an IR code, deflect the speed paddles up or down. An
enabled code appears with a check mark against the highlighted
command.
Figure 50. Screen and speed paddle switch marked A.
49