Flight Mode - Permobil R-net User Manual

Permobil R-net (PJSM)
WARNING!

Flight mode

The ConnectMe device contains a radio transmitter. In certain areas radio
transmission is not allowed and ConnectMe must be set to flight mode, see
3.2 Flight mode . Examples of these types of areas include, but are not
limited to:
• Areas with potentially explosive atmospheres such as fueling areas,
below decks on boats, fuel or chemical transfer or storage facilities,
areas where the air contains chemicals or particles, such as grain, dust,
or metal powders.
• Areas where radio silence is requested such as hospitals, clinics or
health care facilities in order to prevent possible interference with
sensitive medical equipment.
• Airports or inside airplanes where you are instructed to do so by airport
or airline staff.
• Blasting areas or in areas posted with notifications requesting "two-way
radios" or "electronic devices" to be turned off to avoid interfering with
blasting operations.
You are responsible for paying attention to where radio transmission is
allowed and also where it is not allowed.
60
ConnectMe