Using The Meter Memory; Viewing Results On The Meter - Fora V10 Owner's Manual

USING THE METER MEMORY

Viewing Results on the Meter

Your meter stores 450 most recent blood glucose test results along with their
repective dates and times in its memory. It also provides you with 7-, 14-, 21-,
28-, 60- and 90-day averages of your blood glucose test results. You can review
these test result averages in memory through the following easy steps.
·Read the Average of Blood Glucose Results:
When the meter is off, press and release the M
button. The screen shows "
the M button for 2-3 seconds, until blinking "
appears. Release the M button and then the the
7-day average will appear, indicating that you
are in the memory mode. If you continue to press
the M button, the 14-, 21-, 28-, 60- and 90- day
averages will appear in order.
When using the meter for the first time, "---" will appear to indicate that there are
no test results in memory.
The 7- day average is calculated from the blood
glucose results obtained during the last 7 days. It
also indicates how many blood glucose tests have
been performed within this period, e.g., 14 (14
tests in the last 7 days).
The 14- day average is calculated from the blood
glucose results obtained during the last 14 days. It
also indicates how many blood glucose tests have
been performed, e.g., 28 (28 tests in the last 14
days). The same follows for the 21-, 28-, 60- and
90- day averages.
34
". Keep pressing
"