Use; Before Using For The First Time; Assembly; Dismantling - Cuisinart SB2E Instructions Manual

3. USE

A. Before using for the first time
the section 'Cleaning and Maintenance').
tors located under the jar) are perfectly dry before
assembling the unit.
section 3B).
At this stage the unit may smoke a little and release
a slight odour, this is normal.
B. Assembly
it properly onto the jar.
in place before starting the unit.
WARNING: Steam will escape around the measu-
ring cup when the unit is heating up; this is normal,
but handle the cup with care.
by its handle and line up the arrow on the jar with
the arrow on the motor base. If you have difficulty,
turn the motor shaft slightly and repeat.
N.B. Take care when placing the jar on the motor
base. If it is improperly positioned, the interlock
switches may be damaged and this could prevent
the unit from running.
14
C. Dismantling
let.
Do not turn the jar.
WARNING: if the jar contains hot liquid, pour it out
carefully.
-
the jar firmly by the handle with one hand and
grasp the lip of the lid with your other hand to pull
it off.
D. Using the product
switch
switch will begin to flash. This mechanism prevents
accidental activation of the functions.
unit is now in the 'stand-by' mode and is ready to
use.
timer and the cooking temperature.
N.B.: If you wish to reset the settings, press the on/
again. Any setting that you selected will be cancel-
led.
N.B.:To switch this flashing button off, remove the
plug from the unit.
Setting the timer
-