Advertisement
Removing the NAS 100 from the rack
CAUTION:
1. Power off the NAS 100.
2. Disconnect the power cord and all cables from the NAS 100.
The following procedure explains how to remove the NAS 100 in the rack.
1. Pull the NAS 100 out of the rack until the slide rails lock.
2. Pull the white spring tabs towards the front of the NAS 100 until they release,
3. If you are replacing the NAS 100, remove the server slide rails and put them in
1
Spring tab
then ease the NAS 100 out of the rack.
a safe place. You will reinstall them on the new, rack-mounted NAS 100.
™
IBM TotalStorage
NAS 100 Rack Installation Instructions
1
9
Advertisement
