Section 4 Iec 60870-5-103 Parameters And Diagnostics; Parameter List - ABB RELION 615 Series Protocol Manual

1MRS759001 A
Section 4
4.1
Table 14: IEC 60870-5-103 settings
Parameter Values (Range)
Operation
Serial port
Address
Mapping select
Start delay
End delay
DevFunType
UsrFunType
UsrInfNo
Class1Priority
Class2Interval
Table continues on next page
615 series
Communication Protocol Manual
IEC 60870-5-103 parameters and
diagnostics

Parameter list

The IEC 60870-5-103 parameters can be accessed with PCM600 or via the LHMI path
Configuration/Communication/IEC 60870-5-103/I3C0n.
Some parameters are not visible in the "Basic" setting visibility mode.
To view all parameters use "Advanced" setting visibility mode in the
Parameter Setting tool in PCM600 and LHMI.
Unit
1=on
5=off
1=COM 1
2=COM 2
1...255
1...2
0...20 char
0...20 char
0...255
0...255
0...255
0=Ev High
1=Ev/DR Equal
2=DR High
0...86400 s
IEC 60870-5-103 parameters and diagnostics
Step Default
5=off
1=COM 1
1 1
1 1
1 4
1 4
1 9
1 10
1 230
0=Ev High
1 30
Section 4
Description
Selects if this protocol instance is enabled
or disabled
COM port
Unit address
Mapping selection
Start frame delay in chars
End frame delay in chars
Device Function Type
Function type for User Class 2 Frame
Information Number for User Class2
Frame
Class 1 data sending priority relationship
between Events and Disturbance
Recorder data.
Interval in seconds to send class 2
response
33