Technical Data                                                                  35 - Jula Meeс Tools Multi Series Operating Instructions Manual

degree of loading during working hours can be significantly reduced. Minimise
exposure to vibration. Tack care of the power tool in accordance with the
directions in the operating instructions.
• If the power tool is used more frequently, anti-vibration accessories (handles)
should be purchased.
• Avoid using the power tool at temperatures below +10 °C. Establish a working
plan which helps to limit vibration loads. A certain noise load from the
machine can not be avoided. Make sure that noise-intensive tasks are
performed at specific, permitted times. Observe any rest periods and limit the
duration of the work to the most essential. Appropriate ear protection must be
used to protect yourself and other people who are within the vicinity.
Symbol
Read the operating instructions before use.
Rated voltage
Stroke rate
Stroke length
Max. cutting depth
Sound pressure level, LpA
Sound power level, LwA
Vibration
Weight
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used
to compare different tools with each other and for a preliminary assessment of exposure.
WARNING: The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety
precautions are required to protect the user, based on an estimate of exposure in actual operating
conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched off
and when it is idling, in addition to the start-up time).
TECHNICAL DATA
18 VDC
0–3000 spm
26 mm
Wood: 100 mm
87 dB(A), K=3 dB
98 dB(A), K=3 dB
21,98 m/s², K=1.5 m/s²
1.7 kg
EN
35