Texas Instruments SimpleLink CC3135MOD Manual page 34

CC3135MOD
SWRS225B – FEBRUARY 2019 – REVISED MARCH 2020
6.2.2 Network Stack
The network stack features are as follows:
• Integrated IPv4, IPv6, and TCP/IP stack with BSD socket APIs for simple Internet connectivity with any
MCU, microprocessor, or ASIC
Not all APIs are 100% BSD compliant. Not all BSD APIs are supported.
• Support of 16 simultaneous TCP, UDP, RAW, SSL\TLS sockets
• Built-in network protocols:
– Static IP, LLA, DHCPv4, DHCPv6 (Stateful) with DAD and Stateless auto configuration
– ARP, ICMPv4, IGMP, ICMPv6, MLD, ND
– DNS client for easy connection to the local network and the Internet
• Built-in network application and utilities:
– HTTP/HTTPS
• Web page content stored on serial Flash
• RESTful APIs for setting\configuring application content
• Dynamic user callbacks
• Service discovery: Multicast DNS service discovery allows a client to advertise its service without a
centralized server. After connecting to the access point, the CC3135 device provides critical
information, such as device name, IP, vendor, and port number.
• DHCP server
• Ping
Table 6-1 summarizes the NWP features.
Feature
802.11a/b/g/n station
Wi-Fi standards 802.11a/b/g AP supporting up to four stations
Wi-Fi Direct client and group owner
Wi-Fi channels 2.4 GHz ISM and 5 GHz U-NII Channels
Channel Bandwidth 20 MHz
Wi-Fi security WEP, WPA/WPA2 PSK, WPA2 enterprise (802.1x)
Wi-Fi provisioning SmartConfig technology, Wi-Fi protected setup (WPS2), AP mode with internal HTTP web server
IP protocols IPv4/IPv6
IP addressing Static IP, LLA, DHCPv4, DHCPv6 with DAD
Cross layer ARP, ICMPv4, IGMP, ICMPv6, MLD, NDP
UDP, TCP
Transport SSLv3.0/TLSv1.0/TLSv1.1/TLSv1.2
RAW
Ping
HTTP/HTTPS web server
Network applications and
mDNS
utilities
DNS-SD
DHCP server
Host interface UART/SPI
34 Detailed Description
NOTE
Table 6-1. NWP Features
Description
Submit Documentation Feedback
Product Folder Links: CC3135MOD
Copyright © 2019–2020, Texas Instruments Incorporated
www.ti.com