Tx Power Control For 5 Ghz Band - Texas Instruments SimpleLink CC3135MOD Manual

www.ti.com
5.7

TX Power Control for 5 GHz Band

5 GHz power control is done via Image Creator where the maximum transmit power is provided
Image Creator, power control is possible per channel, region
possible to enter an additional back-off
regulatory requirements.
Finally, it is also possible to set the TX and RX trace losses to the antenna per band
(6)
gain can also be provided, thus allowing further control. For a full description of options and capabilities
see the UniFlash CC31xx, CC32xx SimpleLink™ Wi-Fi
and Programming Tool User's
(1) The maximum transmit power range is 18 dBm to 0.125 dBm in 0.125 dBm decrements.
(2) FCC, IC/ISED, ETSI/CE, and MIC are supported.
(3) Rates are grouped into high modulation rates (MCS7, 54 OFDM and 48 OFDM) and lower modulation rates (all other rates).
(4) The back-off range is 0 dBm to 18 dBm in 0.125 dBm increments, with the maximum back-off not exceed that of the maximum transmit
power.
(5) The range of losses if from 0 dBm to 7.75 dBm in 0.125 dBm increments.
(6) The antenna gain has a range of -2 dBi to 5.75 dBi in 0.125 dBi increments.
Copyright © 2019–2020, Texas Instruments Incorporated
(4)
factor per channel and modulation rate for further margin to
Guide.
Submit Documentation Feedback
Product Folder Links: CC3135MOD
SWRS225B – FEBRUARY 2019 – REVISED MARCH 2020
(2)
, and modulation rates
®
and Internet-on-a chip™ Solution ImageCreator
CC3135MOD
(1) . Within
(3)
. In addition, it is
(5)
. The peak antenna
Specifications 21