Height Adjustment Anti-Tip Device - OFF CARR DIVA Instruction Manual

When anti-tip device is not in use it is possible to:
a. Shorten the anti-tip device with the wheel facing up:
• push the lock/quick release button;
• rotate the telescopic tube to bring the wheel facing up;
• slide the telescopic end terminal until the pin snaps in the correct lock position.
b. Remove the anti-tip device:
• push the lock/quick release button;
• remove the anti-tip device.
c. Shorten the anti-tip device with the wheel facing down:
• push the lock/quick release button;
• slide the telescopic end terminal until the pin snaps in the correct lock position.
5.3.1. Height adjustment of the anti-tip device
The position of the anti-tip is defined during
the assembly. It is however possible to
change its distance from ground, if
necessary.
• Remove the "A" screw;
• slide the small wheel for narrow passage
holding tube till the desired height;
• insert the "A" screw and fix it properly.
21