Setting Up; Setting The Rear Height Of The Seat (Costa); Setting The Back-Rest Position - OFF CARR COSTA Instruction Manual

shipped separately. If so they should be properly installed before using the
handbike.

3. Setting up

The handbike is shipped configured according to the order form. The selected
parameters in the order form, should ensure the best postural to match the
customer's needs. Keeping in consideration of potential conflicts of configuration
is still possible to perform other set up adjustment to fit better the user needs.
Please refer to authorized and qualified personnel only to perform any type of
adjustment on the handbike.
3.1

Setting the rear height of the seat (COSTA)

It is possible to change the rear seat height by changing the position of the seat
block:
Unscrew completely
connecting the seat to the rear axle.
Change the position of the seat tube over or under the
rear axle.
Fix again the holders.
3.2 Setting the front height of the seat (COSTA)
It is possible to change the front seat height by changing the position of the seat
block:
Unscrew completely
main frame.
Select the desired position.
Fix again the bar.
3.3

Setting the back-rest position

The back-rest can be move forward and backward and also the be adjusted in
and disassembly the holders
the bar under the seat from the
7