5.2
Curved rear frame anti-tip device
The position of the anti-tip device is defined during assembly. It is however possible to change its distance from the ground if
necessary.
5.2.1
Curved rear frame anti-tip device adjustment
The position of the anti-tip device is defined during assembly. It is however possible to change its distance from the ground if
necessary.
• loosen without removing the "A" screws;
• rotate the fixing plate to obtain the desired ground-
wheel distance;
• fix again the "A" screws.
5.2.2
Telescopic end terminal adjustment
• Remove the "B" screw;
• slide the telescopic end terminal until the small
wheel is in the correct position;
• insert the "B" screw and fix it properly.
5.3
Straight rear frame anti-tip device
Straight rear frame anti-tip device is fixed on small wheel setups for narrow passage aid.
20