Related Manuals for OFF CARR COSTA
Summary of Contents for OFF CARR COSTA
- Page 1 INSTRUCTION MANUAL COSTA ESCAPE FLASH OFF CARR S.r.l. Via Dell’Artigianato II, 29 35010 Villa del Conte (PD) Italy Tel. +39 049 9325733 Fax +39 049 9325734 offcarr@offcarr.com www.offcarr.com...
-
Page 2: Table Of Contents
INDEX 1. INTRODUCTION ................... 4 1.1 COSTA, ESCAPE, FLASH D ..............4 ESCRIPTION 1.2 F COSTA ...................... 4 EATURES 1.3 F ESCAPE ....................5 EATURES 1.4 F FLASH ...................... 5 EATURES 2. PREPARATION FOR USE ................6 2.1 H ..................... 6 ANDBIKE PREPARATION 2.2 P... - Page 3 Thanks for choosing an OFF CARR wheelchair. From more than 25 years OFF CARR listens and interprets customer’s needs by inventing highly innovative and technologic solutions, always aimed at reducing daily mobility problems, with special attention to product style and at improving quality of life for all customers.
-
Page 4: Introduction
COSTA, ESCAPE, FLASH Description The handbikes COSTA, ESCAPE and FLASH are made with a rigid 3 wheel frame with manual pushing. Other details are made with composite materials, as carbon fibre, aluminum or steel alloys. Various frame colours are available. The seat upholstery and of the backrest are, usually made in black nylon cloth. -
Page 5: Features Escape
Features ESCAPE Aluminium frame Adjustable back-rest Padded back-rest and seat upholstery Adjustable foot-rest 26” rear and front wheels 27 gear Shimano XT or Revoshift 24 gear group 2° or 6° or 12° rear wheel camber Parking brake Tension adjustable back-rest upholstery Detachable bumper bar Wireless computer Weight: 17,4 kg... -
Page 6: Preparation For Use
2. Preparation for use The preparation for use of these devices must be performed by qualified personnel both for evaluate the suitability of the product and to provide the correct instructions to the user. 2.1 Handbike preparation The handbike is shipped with the rear wheels not assembled. -
Page 7: Setting Up
Please refer to authorized and qualified personnel only to perform any type of adjustment on the handbike. Setting the rear height of the seat (COSTA) It is possible to change the rear seat height by changing the position of the seat... -
Page 8: Setting The Foot-Rest Position
inclination. To change the inclination act on the rear tube connecting the back-rest to the frame. To move it forward or backward act on the right and left blocks connecting the back-rest to the seat frame. Setting the foot-rest position To change the position of the foot-rest, unscrew the screw fixing the foot- rest to the frame. - Page 9 to contact with materials making up the handbike are developed The fabric used for the upholstery of the handbike is not waterproof. In case of necessity it can be washed with water at low temperature. Keep the handbike away from heat sources, as not all coatings in the order form are fireproof.
-
Page 10: Key Measures To Be Taken To Limit The Risks Associated With Misuse Of The Handbike
5. Key measures to be taken to limit the risks associated with misuse of the handbike It is suggested to verify the proper assembly and the efficiency of the axle fixing the rear wheel before using the hanbike and always after performing releasing and assembly of the rear wheels to the frame. -
Page 11: Maintenance, Inspections And Controls
6. Maintenance, inspections and controls Weekly: . Check the extraction efficiency of the devices and if necessary, grease the pins and bushes with a little of lubricant. Weekly: Check the tire pressure. Each tire shows on the lateral bands the maximum pressure for which they were designed. -
Page 12: Technical Service
7. Technical service For any problems or fault or breakage please inform immediately the authorized dealer supplying the following indications: Model Identification number (“Matricola” on the gold label on the frame). Fault description In case of direct contact with the manufacturer assistance please communicate also: User name and full address Dealer name and address. -
Page 13: Guarantee Terms
Parts subject to normal wear and tear are not covered by the guarantee, unless wear is caused by a manufacturing fault. The guarantee does not cover transport. If a fault occurs during the guarantee period, OFF CARR will: Repair the faulty part Replace the faulty part... -
Page 14: Packaging, Shipping And Delivery
Do not place any objects over the packing case. OFF CARR s.r.l. reserves the right to make improvements and / or changes its products without notice with respect of the device features, suitability and certifications, the warranty contract and the availability of spare parts according with the terms of law.