F99 Reset To The Default Setting - SMC Networks ZSE10 Operation Manual

■[F99] Reset to the default setting
If the setting of the pressure switch becomes unknown, the default setting can be restored.
<Operation>
Press the or button in function selection mode to display [F99].
Reset to the default setting
Set the display [ON] by pressing the
button, then press the
simultaneously for 5 seconds or longer.
[oFF] (unused) selected
Press the button to set.
Return to function selection
mode.
Press the button.
or
and buttons
Setting of [F99] Reset to the default setting completed
Move on to reset to the default setting.
The setting is reset to the
default setting, and the mode
returns to the function
selection mode.
-43-
No.PS※※-OMM0005-G