Troubleshooting; Manual Lowering Tool Operation; Led Indicator Lights - Harmar Mobility PINNACLE SL600 HD Owner's Manual & Warranty Information

HEAVY DUTY STAIR LIFT: SECTION 5

TROUBLESHOOTING

Section 5
Troubleshooting
MANUAL LOWERING TOOL
OPERATION
If your lift fails to operate and the operator does not
wish to dismount on the stairway, another person
may use the manual lowering tool (optional) to lower
(or raise) the lift to a landing. However please follow
the instructions on the bottom safety flap of the lift
and turn the lift off. Insert the manual lowering tool
into the hole in the lower safety flap until it engages
the motor shaft, and turn in the direction indicated.
CAUTION
!
Do not operate the lift with the manual lowering
tool engaged.
SL600HD Heavy Duty Stair Lift:
10
31JAN2020 | P/N: 75404 REV C

LED INDICATOR LIGHTS

If your lift does not operate, diagnose the problem by
observing the LED indicator light on the armrest and
listening to the beeps emitted:
• A green light indicates the lift is in operating
mode and may be moved in either direction.
• An orange light indicates the lift is touching an
obstruction and may be operated only in the
direction away from the obstruction.
• A flashing orange light, accompanied by an
intermittent beep for 30 seconds (after a 5
second delay) indicates the lift has been stopped
off the charge station. It is recommended that
the lift be immediately moved to a charge station
(located either end of the rail).
• A red light indicates a problem that may require
a service call. If the light remains red after
attempting to reset the lift by turning it "Off" and
then "On" again, please contact your local dealer
and describe the problem.
Owner's Manual