ulrich medical neon3 CS 3921 Series Assembly And Disassembly Instructions With Special Cleaning Instructions page 21

Assembly instructions
Assembling the rod reduction
instrument
The inner sleeve of the rod
reduction instrument (CS 3938-09)
is inserted into the outer
sleeve of the rod reduction
instrument (CS 3938-08) until
the circumferential groove of the
inner sleeve is flush with the end
of the outer sleeve. Moreover, the
outer sleeve and the inner sleeve
are aligned in such a way that the
respective longitudinal grooves line
6
up (see diagram).
The handle of the rod reduction
instrument (CS 3938-07) is
completely compressed and the
previously assembled sleeves
are inserted onto the prongs on
the handle for the rod reduction
instrument using the respective
recesses.
neon
3™ Assembly and disassembly instructions 21