Related Manuals for ulrich medical neon3 CS 3921 Series
Summary of Contents for ulrich medical neon3 CS 3921 Series
- Page 1 Assembly and disassembly instructions with special cleaning instructions neon 3™ universal OCT spinal stabilization...
- Page 2 Notes on assembly and disassembly instructions This document lists all of the assembly and disassembly instructions available for the neon system. The instruments must be disassembled according to the manufacturer's instructions in order to guarantee the processing and storage. The product descriptions in the component overview are listed in English according to the labeling on the instruments. The user must ensure that the current versions of the system-related surgical technique and the "Processing manual implants and instruments"...
-
Page 3: Table Of Contents
Contents neon Assembly and disassembly instructions for CS 3921-XX 3™ neon Assembly and disassembly instructions for CS 3929-XX 3™ neon Assembly and disassembly instructions for CS 3930-XX 3™ neon Assembly and disassembly instructions for CS 3932-XX 3™ neon Assembly and disassembly instructions for CS 3938-03/-04/-05 3™... -
Page 4: Neon 3™ Assembly And Disassembly Instructions For Cs 3921-Xx
neon 3™ Assembly and disassembly instructions for CS 3921-XX Components involved: Product no. Product description CS 7150 Gearshift handle, coupling B CS 3921-01 Awl, cannulated, for screws Ø 4.5/5.5 mm, coupling B CS 3921-02 Trocar wire for awl, thoracic neon 3™... - Page 5 Assembly instructions Assembly of the cannulated awl The gearshift handle (CS 7150) is placed on the cannulated awl (CS 3921-01) and the trocar wire (CS 3921-02) is screwed in. While inserting the awl, the release on the gearshift handle must be pulled backwards.
- Page 6 neon 3™ Assembly and disassembly instructions for CS 3921-XX Special cleaning instructions Manual cleaning All lumens and cavities must be rinsed out carefully and thoroughly. Visual inspection Finally, it must be checked whether there is any visible soiling. If this is the case, the previous steps must be repeated.
-
Page 7: Assembly And Disassembly Instructions For Cs 3929-Xx
neon 3™ Assembly and disassembly instructions for CS 3929-XX Components involved: Product no. Product description CS 3929-05 Drill guide CS 3929-02 Depth stop, adjustable CS 3928-04 Trocar, cannulated, for drill 2 CS 3927-04 Adapter for drill 2, serrated CS 3926-04 Adapter for drill 1, blunt CS 3926-05 Adapter for drill 1, serrated... - Page 8 neon 3™ Assembly and disassembly instructions for CS 3929-XX Assembly instructions Inserting the drill attachments onto the drill guide The drill attachments (CS 3923-01, CS 3928-04, CS 3926-04, CS 3926-05, CS 3927-04) are attached to the drill guide (CS 3929-05) until it engages. Attaching the reference star The push-button on the reference star for use with Brainlab...
- Page 9 Disassembly instructions The drill guide must be disassembled for cleaning and storage on the tray. Removing the drill attachments from the drill guide They can be removed from the drill guide by pulling on the drill attachment. Removing the depth stop The release of the drill guide is turned clockwise.
- Page 10 neon 3™ Assembly and disassembly instructions for CS 3929-XX Removing the spheres from the reference star The spheres are single-use products that must be unscrewed after use and disposed of professionally. Dismantling the drill guide Difficult to reach parts must be pre- cleaned manually with a brush in a water bath.
- Page 11 Special cleaning instructions Cleaning the drill attachments and the depth adjuster Difficult to reach parts should be pre-cleaned manually with a brush in a water bath. In addition, the cannulation should be rinsed. The instrument must then be rinsed thoroughly, to avoid any residue from drying.
-
Page 12: Neon 3™ Assembly And Disassembly Instructions For Cs 3932-Xx
neon 3™ Assembly and disassembly instructions for CS 3930-XX Components involved: Product no. Product description CS 3930 Depth gauge Special cleaning instructions Manual cleaning Difficult to reach parts must be pre- cleaned manually with a brush in a water bath. The instrument must then be rinsed thoroughly, to avoid any residue from drying. - Page 13 neon 3™ Assembly and disassembly instructions for CS 3932-XX Components involved: Product no. Product description CS 3932-04 Screwdriver, cannulated, with SR 15 CS 3932-02 Sleeve for screwdriver CS 3932-05 Rotating end for CS 3932-04 CS 3932-07 Screwdriver, cannulated, with SR 15, coupling B neon 3™...
- Page 14 neon 3™ Assembly and disassembly instructions for CS 3932-XX Disassembly instructions The screwdriver must be disassembled for cleaning and storage on the tray. Removing the sleeve By pulling on the sleeve, it can be removed from the screwdriver. Removing the rotating end The rotating end is pulled off of the handle to the rear.
- Page 15 Special cleaning instructions Manual cleaning Difficult to reach parts must be pre-cleaned manually with a brush in a water bath. The movable sleeve and the locking mechanism with a push-button must be moved back and forth and brushed during the manual cleaning in the water bath.
- Page 16 neon 3™ Assembly and disassembly instructions for CS 3938-03, -04 and -05 Components involved: Product no. Product description CS 3938-03 Star grip handle for rod pusher (Persuader) CS 3938-04 Inner sleeve for rod pusher (Persuader) CS 3938-05 Outer sleeve for rod pusher (Persuader) neon 3™...
- Page 17 Assembly instructions Assembling the rod pusher The inner sleeve for rod pusher (CS 3938-04) is inserted into the outer sleeve for rod pusher (CS 3938-05) so that the pins can be guided into the recess. When the first stop is reached, the inner sleeve turns clockwise and after releasing it, it snaps securely into the outer sleeve.
- Page 18 neon 3™ Assembly and disassembly instructions for CS 3938-03, -04 and -05 Special cleaning instructions Cleaning the outer sleeve Difficult to reach parts should be pre-cleaned manually with a brush in a water bath. In addition, the notch at the end of the outer sleeve should be brushed.
- Page 19 Visual inspection Finally, it must be checked whether there is any visible soiling. If this is the case, the previous steps must be repeated. Components maintenance For the maintenance of the components, movable parts, threads, hinges and buttons should be treated with suitable maintenance oil.
- Page 20 neon 3™ Assembly and disassembly instructions for CS 3938-07, -08 and -09 Components involved: Product no. Product description CS 3938-07 Handle for rod reduction instrument CS 3938-08 Outer sleeve for rod reduction instrument CS 3938-09 Inner sleeve for rod reduction instrument neon 3™...
- Page 21 Assembly instructions Assembling the rod reduction instrument The inner sleeve of the rod reduction instrument (CS 3938-09) is inserted into the outer sleeve of the rod reduction instrument (CS 3938-08) until the circumferential groove of the inner sleeve is flush with the end of the outer sleeve.
- Page 22 neon 3™ Assembly and disassembly instructions for CS 3938-07, -08 and -09 Disassembly instructions Disassembling the rod reduction instrument The rod reduction instrument must be disassembled for cleaning and storage on the tray. Removing the sleeves The handle on the rod reduction instrument is completely compressed.
- Page 23 Special cleaning instructions Cleaning the handle Difficult to reach parts should be pre-cleaned manually with a brush in a water bath. Springs and mechanisms must be moved back and forth several times. The instrument must then be rinsed thoroughly, to avoid any residue from drying.
-
Page 24: Neon
neon 3™ Assembly and disassembly instructions for CS 3938-07, -08 and -09 Cleaning the inner sleeve Difficult to reach parts should be pre-cleaned manually with a brush in a water bath. The instrument must then be rinsed thoroughly, to avoid any residue from drying. In addition, the general cleaning instructions of the Processing manual implants and instruments... -
Page 25: Neon
neon 3™ Assembly and disassembly instructions for CS 3954-01 Components involved: Product no. Product description CS 3954-01 OC plate bending clamp Special cleaning instructions Cleaning the OC plate bending clamp Difficult to reach parts should be pre-cleaned manually with a brush in a water bath. - Page 26 neon 3™ Assembly and disassembly instructions for CS 3954-01 Visual inspection Finally, it must be checked whether there is any visible soiling. If this is the case, the previous steps must be repeated. Components maintenance For the maintenance of the components, movable parts, threads, hinges and buttons should be treated with suitable...
- Page 27 neon 3™ Assembly and disassembly instructions for CS 3955-02 Components involved: Product no. Product description CS 3955-02 OC screwdriver, flexible, self-retaining, coupling AO Special cleaning instructions Manual cleaning Difficult to reach parts must be pre- cleaned manually with a brush in a water bath.
- Page 28 neon 3™ Assembly and disassembly instructions for CS 3955-02 Visual inspection Finally, it must be checked whether there is any visible soiling. If this is the case, the previous steps must be repeated. Components maintenance For the maintenance of the components, movable parts, threads, hinges and buttons should be treated with suitable...