CITROEN BERLINGO MULTISPACE Handbook page 76

Lighting and visibility
Manual wiping
2 Fast wiping (heavy rain).
1 Normal wiping (moderate rain).
I Intermittent wiping.
0 Off.
â
Single wipe
(press downwards).
In Intermittent position, the wiping frequency is
proportional to the speed of the vehicle.
After the ignition has been switched off for
more than a minute, with the wiper control
stalk in position 2, 1 or I, the control must be
reactivated.
- Move the control to any position.
- Switch it to the desired position.
Automatic windscreen
wipers
Do not obstruct the rain sensor,
located in the centre of the
windscreen, behind the rear view
mirror.
In AUTO position, the wipers operate
automatically and adapt their speed to the
intensity of the rain.
74
Activation
F Press the control downwards. Activation of
the function is accompanied by a message
on the screen.
If the ignition has been off for more than one
minute, the automatic rain sensitive windscreen
wipers must be reactivated by pushing the
control stalk downwards.
Deactivation
F Place the wiper control stalk in position I, 1
or 2.
Deactivation of the function is accompanied by
a message on the screen.
If a fault occurs with the automatic rain
sensitive wipers, the wipers will operate in
intermittent mode.
Contact a CITROËN dealer or a qualified
workshop to have the system checked.
During an automatic wash, turn off the
ignition to avoid automatic wiping being
triggered.
In winter, it is advisable to wait until the
windscreen is completely clear of ice before
activating the automatic rain sensitive wipers.
Windscreen washer
F Pull the control towards you, the
screenwash action will be accompanied by
a timed operation of the wipers.
https://www.automotive-manuals.net/
The fluid level should be checked
regularly, particularly during winter.
For more information on Checking the
levels and, in particular, the screenwash,
refer to the corresponding section.
Special position of the
windscreen wipers
Operate the wiper stalk within one minute after
switching off the ignition to position the wiper
blades along the windscreen pillars.
This action allows the wipers to be taken up for
winter parking, cleaning or replacement.
For more information on Changing a
wiper blade, refer to the corresponding
section.
To return the wiper blades to the normal
position, switch on the ignition and operate the
wiper stalk.