6-Speed Electronic Gearbox - CITROEN BERLINGO MULTISPACE Handbook

Driving
Engaging reverse gear
F In 6-speed configuration. lift the collar under
the knob.
106
The movement must be carried out slowly
to reduce noise.
To engage reverse gear, wait until the
vehicle is stationary.
th
Engaging 5 or 6
F To fully engage the gear, move the gear
lever all the way to the right.
6-speed electronic
gearbox
Mode selection
https://www.automotive-manuals.net/
- Automated mode: selector in position A.
- Manual mode: selector in position M.
For safety:
Position N can only be released if the
brake pedal is pressed.
th
gear
The change from position A (driving in
automated mode) to position M (driving in
manual mode) or vice versa can be done
at any time. The indicator lamp A in the
instrument panel goes off.
Starting the vehicle
F To start the vehicle, the selector must be in
position N.
F Press firmly on the brake pedal.
F Start the engine.
F With the engine running, place the selector
on R, A or M as required.
F Release the brake pedal and press the
accelerator pedal to move off.
If the selector is not in position N, and/or if the
brake pedal is not pressed, the engine will not
start; begin the above procedure again.
Reverse gear
Engaging reverse gear