CITROEN BERLINGO MULTISPACE Handbook page 52

Ease of use and comfort
F Lower the head restraint.
F Place the seat in fully folded position.
F Tilt the assembly forwards.
F Take hold of each side of the uprights of the
folded seat while tilting it forwards and lift it.
Refitting the seat
The seat label will tell you where it should be
placed.
F Place the hooks of the front feet between
the two bars.
F Ensure that no object or feet are obstructing
the rear anchorage points and that the seat
belt is properly positioned and available.
F Fold the seat backwards to fix its rear
anchorage feet.
F Use the control to raise the backrest into the
initial position.
F Refit the head restraint.
50
Do not place hard or heavy objects on
the backrests forming a table. They could
become dangerous projectiles in the event
of emergency braking or collision.
Following the various operations:
- do not remove a head restraint without
stowing it; secure it inside the vehicle,
- ensure that passengers can always
access the seat belts and fasten them
easily,
- passengers must never take their seat
without adjusting and fastening their
seat belt.
- a passenger seated in row 3 must
ensure that they do not obstruct the
row 2 seat anchorage points,
- a passenger seated in row 3 must
not have the seat in front of them in
row 2 in the fully folded position; this
is in case the seat tips towards the
passenger unexpectedly, which could
cause injury.
https://www.automotive-manuals.net/
Crew cab
Bench seat
The crew cab is made up of a bench seat for
3 persons, located in row 2, whose one-piece
backrest is integrated with the load stop grille.
Access to the rear seats is via the sliding side
door.