Removable Snow Shield; Changing A Wiper Blade - CITROEN BERLINGO MULTISPACE Handbook

Practical information

Removable snow shield

plug
Depending on country, the removable snow
shield plug is installed on the lower part of the
front bumper, to avoid the accumulation of
snow at the radiator cooling fan.
Do not forget to remove the removable
snow shield plug when the exterior
temperature is higher than 10°C (no risk of
snowfall) or if you are towing.
130
Fitting
F Put the removable snow shield in front of its
centring pin A on the front bumper.
F Fit it in place by pressing every clip B at the
four corners.
Removal
F Place a screwdriver at the hole near each
clip.
F Make a lever movement to unclip the four
clips B.

Changing a wiper blade

Putting the windscreen
wiper blades in the special
position
https://www.automotive-manuals.net/
F Within one minute after switching off
the ignition, move the wiper stalk down
to position the wiper blades along the
windscreen pillars (special position).
Changing a windscreen
wiper blade