CITROEN BERLINGO MULTISPACE Handbook page 47

Returning the seat to the sitting position
F Push the red control.
F Fold the seat to fix the rear anchorage
points.
F Lift the backrest by pulling on the control.
F Check that the assembly is anchored
properly.
Before folding it, check that no object is
obstructing the anchorage points and
preventing correct locking of the seats.
Removing the seat
F If necessary, move the front seats forwards
and lower the head restraint.
F Place the seat in fully folded position.
Refer to the "Fully folded" described
earlier.
F Press the red lever to unlock the front feet.
F Tilt the assembly by about 45° backwards
without releasing the lever.
F Release the lever.
F Lift the seat vertically until it abuts with the
anchorages.
F Tilt the seat forwards and then lift it.
Refitting the seat
F Tilt the seat 45° forwards.
F Place the hooks between the two bars.
https://www.automotive-manuals.net/
Ease of use and comfort
F Fold the seat to fix the rear anchorage
points.
F Pull the control to return the backrest to its
initial position.
F Refit the head restraint.
Before folding it, check that no object is
obstructing the anchorage points and
preventing correct locking of the seats.
Following the various operations:
- do not remove a head restraint without
storing it and fixing it to a support,
- ensure that passengers can always
access the seat belts and fasten them
easily,
- a passenger must not take their seat
without adjusting and fastening the
seat belt.
3
45